Special Edition: Reference 211 amplifier
REFERENCE 211 – HIGH END AUDIO
A class of its own, Ultra High End Valve Amplifier Made In Australia
Unlike larger manufacturers, our goals are simultaneously more humble and more ambitious. We are not concerned with generating the most. Instead, we are focused on designing and producing the best. Every Reference 211 amplifier is an example of our commitment to the following goals:
-
To produce the finest individual, customized tube amplification devices for serious lovers of music, art, and handcraft.
-
To design robust and beautiful musical platforms that are not only state-of-the-art, but are also pieces of art themselves.
-
To enable our customers to own unique items that are destined to be future classics.
Features
Circuit design configured with 12AT7 / 6SN7 for amplification and 6SN7 (cathode follower) for the driver stage to powerfully drive the large-scaled transmitter 211 valves.
These circuits are independently powered by grand scale, low ripple and low impedance power supply sections supporting high purity amplification stages.
Enormous output transformers, that are intended to resist core saturation, and extend low frequency response.
Power Supply Circuit
Powerful and high grade power supply section with high grade German made Mundorf capacitors and choke coils.
Full-wave bridge rectifier using GZ34/5AR4 rectifier valves.
There are total of 4 different power supply voltages: -200V for Bias, +200V for the Cascode mode input and cathode follower valves, +450V for the driver valves, and +920V for the output valves.
The 211 heather circuits are mounted with large capacitors (47,000uF x 2) to minimize ripple elements while residual noise level could be attained quite low thanks to employing hum balance circuits.
High Grade Parts
The amplifier is meticulously constructed using the point to point method for componentry construction, to achieve the ultimate musical output. All components we use are of the highest quality. Audio grade 2 watt resistors, paper in oil coupling capacitors (in the signal path), and high quality capacitors for the power supply.
Output transformer handles output impedance of 4, 8 and 16 Ω. The setting is preset for 8 Ω speaker impedance , but can be factory configured for 4 or 16 Ω.
Output Transformers
Super high quality, MASSIVE output transformers for single-ended circuits exclusively. All primary impedances are calculated for Class A, Single Ended operation, with the main consideration given to maximum dynamic power transfer ability and minimum distortion.
Output transformers are Hand Made In House, with precision and accuracy, to ensure the best quality, and audio response. They are the results of years of research, experiments, music listening, and very hard work.
211 Valve
In a word, our mission is to present the finale of tube amplifier design — the ultimate combination of science, art, and craft united in the service of music. All our amplifiers come with 5 years of warranty with proper use, except the tubes. Our amps are all MADE TO ORDER.
Specifications
Product | 211 single ended stereo integrated amplifier |
---|---|
Model | Reference 211 |
Rated power | 25W + 25W @1kHz, 1% THD |
Frequency response | 10Hz ~ 42kHz (+0dB, -3dB @1W) |
Input | 1 direct RCA, 3 selectable RCA |
Output | 4, 8,16 Ω |
Noise | Less than 0.5mV |
Vacuum tube | 211 x2, 6SN7 x2, 12AT7 x2, GZ34/5AR4 x4 |
Power consumption | 180W |
Dimension | 520mm(W) 450mm(D) 260mm(H) (excluding protrusions) |
Weight | ~35kg |
ValveAudio reserve the right to change, modify, add to, or remove any of the content of this site at any time without prior notice, in the course of further developm